Gkretsi, Vasiliki

Despite the important role that mechanical forces play in tumor growth and therapy, the contribution of swelling to tumor mechanopathology remains unexplored. Tumors rich in hyaluronan exhibit a highly negative fixed charge density. Repulsive forces among these negative charges as well as swelling of cancer cells due to regulation of intracellular tonicity can cause tumor swelling and development of stress that might compress blood vessels, compromising tumor perfusion and drug delivery. Here, we designed an experimental strategy, using four orthotopic tumor models, to measure swelling stress and related swelling to extracellular matrix components, hyaluronan and collagen, as well as to tumor perfusion. Subsequently, interventions were performed to measure tumor swelling using matrix-modifying enzymes (hyaluronidase and collagenase) and by repurposing pirfenidone, an approved antifibrotic drug. Finally, in vitro experiments on cancer cell spheroids were performed to identify their contribution to tissue swelling. Swelling stress was measured in the range of 16 to 75 mm Hg, high enough to cause vessel collapse. Interestingly, while depletion of hyaluronan decreased swelling, collagen depletion had the opposite effect, whereas the contribution of cancer cells was negligible. Furthermore, histological analysis revealed the same linear correlation between tumor swelling and the ratio of hyaluronan to collagen content when data from all tumor models were combined. Our data further revealed an inverse relation between tumor perfusion and swelling, suggesting that reduction of swelling decompresses tumor vessels. These results provide guidelines for emerging therapeutic strategies that target the tumor microenvironment to alleviate intratumoral stresses and improve vessel functionality and drug delivery.

Metastasis is a multistep process in which tumor extracellular matrix (ECM) and cancer cell cytoskeleton interactions are pivotal. ECM is connected, through integrins, to the cell's adhesome at cell-ECM adhesion sites and through them to the actin cytoskeleton and various downstream signaling pathways that enable the cell to respond to external stimuli in a coordinated manner. Cues from cell-adhesion proteins are fundamental for defining the invasive potential of cancer cells, and many of these proteins have been proposed as potent targets for inhibiting cancer cell invasion and thus, metastasis. In addition, ECM accumulation is quite frequent within the tumor microenvironment leading in many cases to an intense fibrotic response, known as desmoplasia, and tumor stiffening. Stiffening is not only required for the tumor to be able to displace the host tissue and grow in size but also contributes to cell-ECM interactions and can promote cancer cell invasion to surrounding tissues. Here, we review the role of cell adhesion and matrix stiffness in cancer cell invasion and metastasis.

Extracellular matrix (ECM)-related adhesion proteins are important in metastasis. Ras suppressor-1 (RSU-1), a suppressor of Ras-transformation, is localized to cell–ECM adhesions where it interacts with the Particularly Interesting New Cysteine-Histidine rich protein (PINCH-1), being connected to Integrin Linked Kinase (ILK) and alpha-parvin (PARVA), a direct actin-binding protein. RSU-1 was also found upregulated in metastatic breast cancer (BC) samples and was recently demonstrated to have metastasis-promoting properties. In the present study, we transiently silenced RSU-1 in BC cells, MCF-7 and MDA-MB-231. We found that RSU-1 silencing leads to downregulation of Growth Differentiation Factor-15 (GDF-15), which has been associated with both actin cytoskeleton reorganization and metastasis. RSU-1 silencing also reduced the mRNA expression of PINCH-1 and cell division control protein-42 (Cdc42), while increasing that of ILK and Rac regardless of the presence of GDF-15. However, the downregulation of actin-modulating genes PARVA, RhoA, Rho associated kinase-1 (ROCK-1), and Fascin-1 following RSU-1 depletion was completely reversed by GDF-15 treatment in both cell lines. Moreover, complete rescue of the inhibitory effect of RSU-1 silencing on cell invasion was achieved by GDF-15 treatment, which also correlated with matrix metalloproteinase-2 expression. Finally, using a graph clustering approach, we corroborated our findings. This is the first study providing evidence of a functional association between RSU-1 and GDF-15 with regard to cancer cell invasion.

Double-hydrophilic, semi-interpenetrating (semi-IPN) hydrogels are synthesized by encapsulating hydrophilic polyvinylpyrrolidone (PVP) linear chains in structure-defined 1,2-bis-(2-iodoethoxy)ethane (BIEE)-crosslinked (poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) hydrogels. A series of semi-IPN double-hydrophilic hydrogels are prepared in which the pDMAEMA/BIEE content is kept the same and only the PVP content is varied, from 0 up to 33 wt%. The mechanical properties of the water-swollen hydrogels are experimentally evaluated under unconfined compressive loading conditions, while a nonlinear hyperelastic constitutive equation is used to predict their mechanical response. No significant difference is found in the mechanical response of the semi-IPN PVP/pDMAEMA/BIEE hydrogel containing 5 wt% PVP compared to the pDMAEMA/BIEE analog, however, for greater loading percentages (15 and 33 wt% of PVP), the semi-IPN hydrogels exhibit less stiffness/higher ductility. Furthermore, in vitro biocompatibility studies are carried out for the pDMAEMA/BIEE and the semi-IPN PVP/pDMAEMA/BIEE, indicating that both the formulations exhibit no toxicity in cultured cells.

As extracellular matrix (ECM) nano-characteristics play a crucial role in cell behavior, including cancer development and metastasis, several ECM in vitro models have been used in order to study cells behavior under different biochemical and mechanical conditions. Among the ECM constituents, collagen (especially collagen type I) has been extensively used as an essential component of ECM models, since it is one of the most abundant ECM protein. Use of three-dimensional (3D) collagen gels provides the advantage of allowing the cells to grow in a 3D environment that bears strong similarities to their natural, in vivo setting. Thus, the ability to form collagen gels with tunable stiffness and well defined naturally occurring nano-characteristics is crucial for these studies. Atomic Force Microscopy (AFM) is a unique tool that is ideal for the complete characterization of such models, in terms of morphology and mechanical properties without destroying the collagen fiber structure. In this protocol, the development and the AFM nano-scale characterization of 3D collagen type I gels is presented. The protocol includes: • The formation of 3D collagen type I gels with tunable stiffness• The preparation of histological sections from collagen gels• The AFM-based morphological and mechanical nano-characterization of the gels

Inefficient delivery of drugs is a main cause of chemotherapy failure in hypoperfused tumors. To enhance perfusion and drug delivery in these tumors, two strategies have been developed: vascular normalization, aiming at normalizing tumor vasculature and blood vessel leakiness, and stress alleviation, aiming at decompressing tumor vessels. Vascular normalization is based on anti-angiogenic drugs, whereas stress alleviation is based on stroma-depleting agents. We present here an alternative approach to normalize tumor vasculature, taking into account that malignant tumors tend to develop at sites of chronic inflammation. Similarly to tumor vessel leakiness, inflammation is also characterized by vascular hyperpermeability. Therefore, testing the ability of anti-inflammatory agents, such as non-steroidal anti-inflammatory drugs (NSAIDs) or inflammation resolution mediators, as an alternative means to increase tumor drug delivery might prove promising.

Background: Tumor microenvironment consists of the extracellular matrix (ECM), stromal cells, such as fibroblasts (FBs) and cancer associated fibroblasts (CAFs), and a myriad of soluble factors. In many tumor types, including pancreatic tumors, the interplay between stromal cells and the other tumor microenvironment components leads to desmoplasia, a cancer-specific type of fibrosis that hinders treatment. Transforming growth factor beta (TGF-β) and CAFs are thought to play a crucial role in this tumor desmoplastic reaction, although the involved mechanisms are unknown. Methods: Optical/fluorescence microscopy, atomic force microscopy, image processing techniques, invasion assay in 3D collagen I gels and real-time PCR were employed to investigate the effect of TGF-β on normal pancreatic FBs and CAFs with regard to crucial cellular morphodynamic characteristics and relevant gene expression involved in tumor progression and metastasis. Results: CAFs present specific myofibroblast-like characteristics, such as α-smooth muscle actin expression and cell elongation, they also form more lamellipodia and are softer than FBs. TGF-β treatment increases cell stiffness (Young's modulus) of both FBs and CAFs and increases CAF's (but not FB's) elongation, cell spreading, lamellipodia formation and spheroid invasion. Gene expression analysis shows that these morphodynamic characteristics are mediated by Rac, RhoA and ROCK expression in CAFs treated with TGF-β. Conclusions: TGF-β modulates CAFs’ but not FBs’ cell shape, stiffness and invasion. General Significance: Our findings elucidate on the effects of TGF-β on CAFs’ behavior and stiffness providing new insights into the mechanisms involved.

Metastasis to distant organs and not the primary tumor itself is usually the cause of death for cancer patients. Hence, studying the key molecules and molecular pathways involved in metastasis are essential. Metastasis is a complex process in which cancer cells detach from the original tumor, migrate, and invade through surrounding tissues and metastasize to other sites of the body through the circulation. The cell-extracellular matrix (ECM) adhesion proteins play a fundamental role in this process as cancer cells need to weaken their adhesions to dissociate from the ECM as well as the neighboring cells within the tumor and finally form new adhesions and invade surrounding tissues. Ras suppressor-1 (RSU-1) was originally identified as a suppressor of Ras-dependent oncogenic transformation and found to be localized to cell-ECM adhesions where it binds to PINCH-1, a focal adhesion involved in cell survival. Although RSU-1 was connected to cancer early on, little is known about its expression in various cancer types or its role in metastasis. In this article, we review the recent literature regarding the expression of RSU-1 in various cancer types and its potential role in metastasis, discussing interesting findings and issues that still need to be addressed.

Solid tumor pathophysiology is characterized by an abnormal microenvironment that guides tumor progression and poses barriers to the efficacy of cancer therapies. Most common among tumor types are abnormalities in the structure of the tumor vasculature and stroma. Remodeling the tumor microenvironment with the aim to normalize any aberrant properties has the potential to improve therapy. In this review, we discuss structural abnormalities of the tumor microenvironment and summarize the therapeutic strategies that have been developed to normalize tumors as well as their potential to enhance therapy. Finally, we present different in vitro models that have been developed to analyze and better understand the effects of the tumor microenvironment on cancer cell behavior.

Atomic force microscope (AFM) is a powerful and invaluable tool for imaging and probing the mechanical properties of biological samples at the nanometric scale. The importance of nano-scale characterization and nanomechanics of soft biological tissues is becoming widely appreciated, and AFM offers unique advantages in this direction. In this chapter, we describe the procedure to collect data sets (imaging and mechanical properties measurement) of collagen gels and tumor tissues. We provide step-by-step instructions throughout the procedure, from sample preparation to cantilever calibration, data acquisition, analysis, and visualization, using two commercial AFM systems (PicoPlus and Cypher ES) and software that accompanied the AFM systems and/or are freeware available (WSxM, AtomicJ). Our protocols are written specifically for these two systems and the mentioned software; however, most of the general concepts can be readily translated to other AFM systems and software.